5.4. Remote control (Spa buttons)

The pumps can be activated from the spa if the appropriate switches are installed. Each switch can control one or more pumps at once. Depending on the system’s configuration.

  • By pressing the corresponding switch the pump begins to operate and does not stop until the time programmed in parameter d1 (Units and Massage Setting Menu) is completed or the switch is pressed again.
  • If the parameter d2 has been programmed with a value greater than 0 the pump may not be activated until this time has elapsed.
  • Massage and inhibition time are independent for each switch.

Air massage pump(s) remote activation
Water massage pump(s) remote activation
Light (option)