5.6. Renewing the spa water

To change the Spa water:


• Disconnect the electrical equipment, placing the differential switch (installed in the main input of the home) in the OFF position.

• Locate the drain valve (see 3.3 Drainage) and turn the valve to the OPEN position.  The Spa will empty by gravity through the general drain.

• Once the Spa is empty, inspect the acrylic and clean if necessary (see  point 6.5 Acrylic Maintenance).  Turn the drain valve to the CLOSED position.

• Fill the Spa with clean water (see 3.4 Filling the spa)