Carefully follow current regulations regarding accident prevention and respect regulations
in each country.
Any modification on the equipment requires prior authorisation from the manufacturer. Original spare parts and accessories authorised by the manufacturer guarantee greater safety. The manufacturer of the equipment is exempt from all liability for damages caused by using non-authorised spare parts or accessories.
The manufacturer shall not be responsible for the damages caused by the assembly of nonauthorized accessories, nor for those caused by an improper handling by nonqualified personnel. Please contact your authorised dealer or technical assistance service if you have any doubts or need technical assistance.
The equipment should be installed in a place which has been properly prepared and where all components of the Spa can be easily accessed. The guarantee does not cover work needed to be carried out to install or replace the product. (See the Guarantee).
The user shall ensure that qualified adult professionals carry out both the assembly and maintenance works, who have previously carefully read the installation and service instructions.
Contact the Technical Service of the manufacturer or your local dealer in the event of malfunction or a breakdown.
The installation of the Spa must always meet current regulations applicable in each country, particularly those referring to electrical safety.
This unit must be installed in an appropriately prepared area with easy access to all the components of the Spa. The Guarantee does not cover any building work required to position or replace the product. (See the Guarantee).
The floor must be capable of supporting the expected load.
During operation, some parts of the equipment are at dangerous electrical voltage levels. Work on each element or equipment can only be performed once it has been disconnected from the mains and with the start-up devices disconnected.
Safety in the operation of the machine can only be guaranteed if installation and service instructions are followed.
There is a risk of flooding with this equipment and therefore, the Spa should be installed in an area prepared to collect or drain leaking water (either from below or overflowing water) because of using the Spa or from possible leakage in any of its circuits. (See the Guarantee).
Carefully follow current regulations regarding accident prevention.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The limits indicated on the electrical control panel cannot be exceeded under any circumstances.
Avoid contact with electrical voltage.
The appliance should be supplied through a residual current device (RCD) with a rated tripping current not exceeding 30 mA.
In case you use a cover that does not have fastening and/or safety elements for preventing unsupervised access to your spa, it is recommended that you install an alternative element (e.g., access control system, fence, etc.) to prevent the unauthorised access to and use of your spa.
The spa cover should always be kept on to reduce heat loss between uses (not during use).
For safety reasons, only accessories supplied by the spa manufacturer should be used.
It is recommended that experts and/or local authorities be consulted for the application of local or national laws and regulations regarding childproof fencing, safety barriers, lighting and other safety requirements.
ATTENTION Correct earthing connection is essential. The earth connection circuit of the building must be in perfect condition to guarantee the safety of the Spa user. If you have doubts on the matter, ensure the earth circuit is reviewed by qualified personnel. The manufacturer shall not be responsible for the damages caused by inadequate maintenance of the ground connection circuit. It is essential that the owner of the Spa tests the Residual Current Device (RCD) at least once a month, to check its good working order.
WARNING – RISK OF INJURY The spa’s suction devices are sized to match the specific water flow from the pump. If any of these items need to be replaced, check that the flow rates are compatible.
Never operate the spa if the suction devices are broken or missing. Never replace a suction device with one that has a lower flow rate than the original.
SAFETY SIGNS (NOT SUPPLIED)
Place permanently the safety and warning symbols on the spa or within 2 meters of it in a clearly visible location.
a) Keep children under supervision in the aquatic environment
c) Read the instruction manual/ booklet
b) No diving
d) Do not put finger into the nozzle of a hydromassage
