The compact equipment enables you to perform several operations. They are all controlled by the Automatic-Manual Selector and the filter selector valve.
AUTOMATIC
MANUAL SELECTOR VALVE
ATTENTION No parts can be repaired by the user. Do not try to repair this control box. Call your dealer or maintenance staff to request technical assistance. The installation should be carried out by an authorised electrician who should follow all the electrical connection instructions of this manual. The selector is provided with a fuse to protect the filtering pump against overvoltage. If a fuse blows, the button projects and a white band can be seen. It should be pressed to reset..
SWITCHING THE POWER SUPPLY OF THE EQUIPMENT ON/OFF
To connect the equipment to the power supply, it should be connected to the electrical supply, placing the differential switch in the ON position. To switch it off, place in the OFF position.
WATER FILTERING
Filtering is controlled automatically by the pre-programmed filtering cycles or when the system detects a reduction in temperature and activates the system to heat the water.
When the kit is operating normally, the Automatic-Manual Selector should always be in the automatic position.
The Automatic–Manual Selector should always be in the automatic position when the kit is operating normally, otherwise the digital system will commit errors which could lead to significant damage of the equipment.
Put the selector valve in the FILTERING position to let the sand retain the particles while water is passing.
HOW TO EMPTY THE SPA
The compact equipment can empty the Spa. To do this, follow these steps:
Open the valves of the circuits that by-pass water to the drain.
Turn off the Filtering Pump by placing the selector in the OFF position.
Place the selector valve in the EMPTYING position.
Turn on the Filtering Pump by placing the selector in the Manual position.
Once the Spa is empty, turn off the filtering pump by placing the selector in the OFF position and disconnect the equipment from the power supply.
To refill the spa, place the valves in their normal position.
ATTENTION When the water level in the Spa is insufficient for the pump to suck water, must shut the pump by turning the selector to the OFF position. If the pump works without water would suffer major damage. Emptying will drain through.
