6.1. Warnings

  • Before carrying out any electrical or mechanical maintenance work, make sure that the machine is disconnected from the mains, and that the start-up devices are blocked.
  • Do not handle the equipment with wet feet.
  • Before carrying out any work on the Spa, it should be switched off from the electrical supply (differential in the OFF position, or disconnect the mains cable).
  • Remember that this equipment can not  be connected to a normal plug.
  • This equipment requires suitable electrical installation. This should be performed by a qualified person following the electrical safety standards of each country.
  • The electrical supply of the Spa should always be protected by a highly sensitive differential.  A 30 mA differential is recommended.
  • Earth connection is essential.  The earthing circuit of the building should always be in perfect condition to guarantee the safety of the Spa user.  If you have any doubts on this, ensure that the earth circuit is checked by a qualified person.  The manufacturer is not responsible for possible damage caused by unsuitable maintenance of the earth circuit.
  • Do not connect the electrical equipment (differential in the ON position), if the Spa is empty of water.
  • Use a cable of a section suitable to the power of the Spa and the distance to the panel.
  • Always observe the instructions included in Safety Warnings chapter of this manual.
  • Never try to access an electrical component unless you are qualified or are the Head of Maintenance.
  • Never handle electrical elements with wet feet.
  • Means must be incorporated to disconnect the spa  from the electrical network as part of the fixed installation, according to the current regulations.