Replacing the lamp is the only required maintenance on the spotlight. To replace the lamp, follow these steps:
Dismantle the wooden side panel where the spotlight is installed using a medium-sized stecker screwdriver.
To replace the lamp, turn the lamp-holder bushing anticlockwise and lift it from its position.
Once the faulty lamp has been replaced, place the lamp-holder back in position and reassemble the wooden side panel of the Spa.
If you have any doubt about the explanation of this operation, contact your authorised dealer or authorised technical service.
WARNING- RISK OF ELECTRIC SHOCK Make sure the power of the Spa is turned off. The new lamp must have the same features as the lamp supplied. Never install lamps without the front lens. To ensure perfect watertightness, clean the mounting base of the flat gasket of the glass or replace it if you observe any dents or permanent damage.