The only spotlight maintenance that may be required is the replacement of the lamp. Follow the steps below to replace the lamp. It is not necessary to drain the water from the hot tub:
Remove the wooden panel on the side where the hot tub’s spotlight is installed, using a screwdriver if necessary.
To replace the lamp, turn the bulb socket anticlockwise and remove the lamp and replace it.
After replacing the faulty lamp with a new one, return the bulb socket to its housing and reinstall the hot tub’s wooden side panel.
If you are unsure or have questions about the above process, contact your dealer or authorised technical service.
WARNING- RISK OF ELECTRIC SHOCK Make sure that no power is being supplied to the hot tub. The new lamp must have the same characteristics as the one supplied with the hot tub. Never install a lamp without a front lens. Make sure that it is properly sealed. Check the condition of the gasket and replace it.
