With this function installed, the functions (massage and filtration) are activated regularly to prevent the water-carrying parts from freezing. This function starts automatically if the temperature detected by the water probe is ≤ 7°C.
If smart winter mode is activated, filtration is stopped and then resumed 1 minute after SWM ends.
Activation of functions: The massage pump is activated for 1 minute. If it is not yet running, the filtration pump is activated while the other functions remain activated.
The message “ICE” appears on the screen while this function is underway. If smart winter mode is activated, this system will not allow any other function to be enabled. However, if there is an active function, this mode will be disabled and, if it is still required, it will start 15 minutes after the active function is disabled.
